How to fix “There is a time and/or date difference between the client and server. [ERROR_TIME_SKEW (0x576)]” – Error Code 1398
Error Code 1398
Error code Error Code 1398 is a common Windows issue that typically arises from “There is a time and/or date difference between the client and server. [ERROR_TIME_SKEW (0x576)]”.
Overview
In this article, we’ll focus on resolving the issue described as: “There is a time and/or date difference between the client and server. [ERROR_TIME_SKEW (0x576)]”. This error, identified by the error code Error Code 1398, can impede your system’s performance, and here’s how you can fix it.
Identifying the Problem
Error Code 1398 occurs when there’s a time or date discrepancy between your computer and the server you’re trying to communicate with. This can happen due to incorrect system time settings, NTP server issues, or hardware-related problems.
Common Fixes
1. Set the Correct Time and Date:
* Right-click on the clock in the taskbar and select “Adjust date/time.”
* Ensure that the time and date are set correctly.
2. Disable and Re-enable NTP:
* Press Windows Key + R and type “services.msc.”
* Find “Windows Time” in the list and right-click on it.
* Select “Stop” and then “Start.”
3. Resync Time with an NTP Server:
* Open Command Prompt as administrator.
* Type “w32tm /resync” and press Enter.
* This will resynchronize your computer’s time with an NTP server.
4. Update the BIOS:
* An outdated BIOS can cause time-related issues. Visit your motherboard manufacturer’s website to download the latest BIOS update.
Advanced Troubleshooting
1. Check the CMOS Battery:
* The CMOS battery powers the system clock when your computer is turned off. Replace the battery if it’s weak or failing.
2. Inspect the Hardware:
* If the fixes above don’t resolve the issue, there might be a hardware problem. Check the motherboard, CMOS, and CPU for any physical damage.
3. Enable Windows Time Service:
* Press Windows Key + R and type “services.msc.”
* Find “Windows Time” in the list.
* Right-click on it, select “Properties.”
* Ensure that “Startup type” is set to “Automatic” and that the service is started.
Conclusion
By following the steps outlined in this article, you should be able to resolve Error Code 1398 and restore normal system operation. Remember to keep your system’s time and date updated, and consider using a reliable NTP server for accurate time synchronization.