How to fix “A connection attempt failed because the connected party did not properly respond after a period of time or established connection failed because connected host has failed to respond. [WSAETIMEDOUT (0x274C)]” – Error Code 10060

Overview

In this article, we’ll focus on resolving the issue described as: “A connection attempt failed because the connected party did not properly respond after a period of time or established connection failed because connected host has failed to respond. [WSAETIMEDOUT (0x274C)]”. This error, identified by the error code Error Code 10060, can impede your system’s performance, and here’s how you can fix it.

Identifying the Problem

Error Code 10060 occurs when a connection attempt times out, usually due to network issues or firewall blockage. It commonly manifests in online gaming, web browsing, and other internet-dependent activities.

Common Fixes

1. Check Internet Connection:
* Ensure your device is connected to a stable internet source.
* Reset your router/modem by unplugging and replugging it.
* Contact your ISP to rule out any service interruptions.

2. Disable Firewall Temporarily:
* Disable Windows Firewall by going to Control Panel > Windows Defender Firewall.
* Test the connection after disabling the firewall.
* Re-enable the firewall after troubleshooting.

3. Reset TCP/IP Stack:
* Open Command Prompt as administrator.
* Run the following commands:
netsh int ip reset reset.log
netsh winsock reset catalog
ipconfig /flushdns
* Restart your computer.

Advanced Troubleshooting

1. Update Network Drivers:
* Go to Device Manager > Network Adapters.
* Right-click on your network adapter and select “Update Driver”.
* Choose “Browse my computer for drivers” and follow the on-screen instructions.

2. Change DNS Settings:
* Go to Control Panel > Network and Sharing Center > Change Adapter Settings.
* Right-click on your network connection and select “Properties”.
* Under Internet Protocol Version 4 (TCP/IPv4), click “Properties”.
* Set the Preferred DNS Server and Alternate DNS Server to:
8.8.8.8 (Google DNS)
8.8.4.4 (Google DNS)

3. Disable IPv6:
* Go to Control Panel > Network and Sharing Center > Change Adapter Settings.
* Right-click on your network connection and select “Properties”.
* Uncheck the box for “Internet Protocol Version 6 (TCP/IPv6)”.

Conclusion

Error Code 10060 can disrupt internet connectivity, affecting various applications. By following the common fixes and advanced troubleshooting steps outlined above, you can effectively resolve this issue. Remember to restart your system after each troubleshooting step and re-test the connection. If the problem persists, seek professional assistance from your network provider or a qualified technician.